Columbarium Niche Manufacturer, Columbarium Company
A factory specializing in the production of columbarium and urn niches. As a professional funeral storage equipment manufacturer and service provider, we have been focusing on the production and sales of funeral storage, Buddhist supplies, and sacrifice equipment. Funeral sacrifice products include: niche racks, Tablet stands, Wanfo walls, Buddha statues, Buddhist niches, etc. Columbarium is suitable for all kinds of funeral homes, funeral service centers, crematoriums, cemeteries, cemeteries, temples, churches, etc. Our products support customization and export
1. Columbarium structure specifications: vertical non-splicing integral combined type; single door outer diameter: 403 × 303 × 300 mm.
2. Technical parameters of the main spare parts of the ashes storage rack
sequence
No
part
material
Specifications (㎜)
Safety and reliability
color
Remark
1
box
High quality galvanized sheet
0.6㎜
50 years without rust, deformation and oxidation
Electrophoresis gold
There can be no gaps in the upper and lower combination
2
base
GB 6063 aluminum alloy profile
Single side thickness 1.0mm
50 years without rust, deformation and oxidation
Electrophoresis gold
Frosted gold anodized plus electrophoresis
3
top cover
International 6063 aluminum alloy profiles
Single side thickness 1mm
50 years without rust, deformation and oxidation
Frosted gold anodized plus electrophoresis
4
panel
Aluminum composite panel
Gold aluminum composite panel
Bright and colorfast
golden bottom
5
panel pattern
With a classic and rich three-dimensional pattern, the actual sample shall prevail.
6
door frame
International 6063 aluminum alloy profiles
Single side thickness 1mm
50 years of no rust, no fading, no deformation, no oxidation
Electrophoresis gold
Frosted gold anodized plus electrophoresis
7
hinge
Stainless steel
Good
tightness
8
special lock
Stainless steel
Corrosion and oxidation resistance
Does not rust
9
side panel
National standard aluminum composite panel for interior decoration
30 wire double-sided aluminum plate aluminum-plastic plate thickness 3mm
The pattern is fixed around the bead
10
number plate
ABS
Gold lettering on red background
3. Bearing parameters and coating parameters of ashes storage rack
Lattice bearing plate load-bearing performance
The bearing plate of each layer of the storage rack should be negative 50kg, the deflection should not exceed 0.5mm, and the cabinet door should not be stuck.
Cabinet load-bearing performance
The upper part of the cabinet should bear at least 500kg static load, and there will be no visible permanent deformation after 48 hours
Spray thickness/(㎜)
(0.02-0.025)
Hardness/(degree)
≥0.4
Impact resistance/(km·cm)
≥40 No peeling, cracking or wrinkling
fireproof
High-grade fire protection
adhesion
Not lower than level 2
Gloss
≥90%
preservative
Salt water resistance 2h, no rust, no aging, no deformation, no cracking, no drumming, no discoloration, no fading, no degumming, no moth-eaten, no mildew, no burr
Exterior
All screws in the visible part of the main body shall not be exposed
seal
There shall be no light leakage or gap between the back and the back of the cabinet, layer and layer, and column and column ≥ 0.5mm
Remarks: 1. The limit deviation of the outer dimensions of the columbarium is not more than 2mm.
2. Columbarium door panel design: three-dimensional
3. Panel production process: imitation glazed relief Buddha statue
4. Shelf bearing capacity: ≥220N
5. Static load performance of the whole group: 1000KG